Psu cable will not fit into CPU power socket

[x1expert1x]

So I just bought a corsair cx430 off of of newegg. Removed the old PSU, placed in the new one, and this new psu has a dual-CPU jack. Here's a picture to show you, the thing circled in green is in the way of the CPU power cable.

http://i.imgur.com/pWerowg.jpg

In this photo you can see the black plug, which is new, and the white single plug, which is the old one.

http://i.imgur.com/SLIQv3a.jpg

I was thinking of cutting off the CPU cable from another psu, sticking it into the holes of these, and taping it in place. I don't have a solder gun and do not want to return this psu.

 

[Sakkura]

I would suggest an 8-pin EPS to 4-pin ATX12V adapter.

http://www.amazon.com/HDE-8-Pin-Power-4-Pin-Cable/dp/B002BFNZAO

 

[Sakkura]

By the way, are you sure the 8-pin plug doesn't separate into two 4-pins? It's supposed to.

 

[thently]

Have you tried putting it in there I had one like this it will still plug in the 4 extra connectors just hang off the side. This is no big deal.

Edit O I C the issue thingies in the way... ya adapter all the way dont cut the wires you might later want the 8 for a newer board.

Thent

 

[x1expert1x]

By the way, are you sure the 8-pin plug doesn't separate into two 4-pins? It's supposed to.

Oh my god I'm such an idiot thank you so much!! I can't thank you enough! I already cut off the CPU connector off my old Mac lol. Wow gosh thank you so much!