psu has no molex

[oSGT_WAYNEo]

I just bought the thor v2 case for my first build and the power supply that i have didn't come with any 6 pin to molex connectors. So the predicament that i'm in is that the case come with 2 male molex wires so i need a 6 pin (plugin into the psu) to 2 female molex and i can't seem to find these anywhere so if someone could please assist me it would be great thank you

 

[hwc1954]

I think a lot of power supplies now just come with SATA power cables, since those are what all DVD, hard disk and SDD drives require these days.

To get a Molex, a simple SATA to MOLEX adaptor will do the trick:

http://www.amazon.com/StarTech-LP4SATAFM6IN-6-Inch-Power-Adapter/dp/B004GSH9KQ

If you need two molex connectors, get this one:

http://www.amazon.com/15-Pin-Female-Splitter-Manhattan-308977/dp/B002LBROAA

I found one that goes from SATA to 4 molex connectors.

 

[oSGT_WAYNEo]

I think a lot of power supplies now just come with SATA power cables, since those are what all DVD, hard disk and SDD drives require these days.

To get a Molex, a simple SATA to MOLEX adaptor will do the trick:

http://www.amazon.com/StarTech-LP4SATAFM6IN-6-Inch-Power-Adapter/dp/B004GSH9KQ

If you need two molex connectors, get this one:

http://www.amazon.com/15-Pin-Female-Splitter-Manhattan-308977/dp/B002LBROAA

I found one that goes from SATA to 4 molex connectors.

well the only issue is is that my psu only has 6 pin slots in the back no sata slots...the sata cord comes straight out of the psu...however the mobo i got came with a sata port i can attatch to the mobo if its needed but idk if running the case itself off of the motherboard would hurt it

 

[hwc1954]

Are you using all of the SATA connectors on the SATA cord coming straight out of the PSU? If not, then the SATA to Molex adaptors will plug into an unused SATA connector. If you've used them all, then, use a SATA SPLITTER to get an extra SATA, then the connectors.

Or contact the PSU manufacturer and find out where to get MOLEX cables to fit your PSU!

 

[oSGT_WAYNEo]

Are you using all of the SATA connectors on the SATA cord coming straight out of the PSU? If not, then the SATA to Molex adaptors will plug into an unused SATA connector. If you've used them all, then, use a SATA SPLITTER to get an extra SATA, then the connectors.

Or contact the PSU manufacturer and find out where to get MOLEX cables to fit your PSU!

antec is lacking on their customer support lol thanks ill look into it and see what i can figure out