PSU Lepa N500

[Valkor]

i have PSU Lepa N500 (Lepa N500-A5) and i want to know if it is has enough power to run GTX-1060?

 

[VincentP]

From the specs on the Lepa website, the supply is rated at 34A on a single +12V rail.
From this, it has plenty of power available for the GTX 1060 in a standard system.
The quality how ever is pretty suspect:
- They list Active PFC for EU models only (N500-SA-EU but not N500-SA). Active PFC is a basic requirement for and decent PSU.
- No 80 plus rating. This is a rating for efficiency, but any supply that can't meet the 80 plus requirements is usually terrible quality.
Data sheet:
http://www.lepausa.com/downloads/datasheet_lepa_n.pdf

I would recommend you look at a better quality supply.
Here are some suggestions:
Rosewill capstone 450
XFX Pro 550
XFX TS 550
Seasonic S12II 430
Seasonic S12G 450
Antec HCG 520

You can also look at anything from tier 1 or 2 in this list:
http://www.tomshardware.com/forum/id-2547993/psu-tier-list.html

 

[Valkor]

how about Thermaltake Berlin 630W ? is it good?

 

[VincentP]

Yes, this is a much better supply.