psu no display

[CaseyR]

ok so i bought a geforce 220 grahpic card worked find but then i decided to up grade my psu to a coolermaster 500 360watt from a 300 watt so i hooked it up now the display doesnt work the pc powers up but no display i tried everything to get it to work and nothing i have ipibl- la mobo i dont know if that helps but yeah....

 

[rolli59]

Does it work if you put the old one back in?

 

[CaseyR]

Does it work if you put the old one back in?

nope same problem no display
his the psu i wanted to use http://s1088.photobucket.com/user/wickedhunter1/media/cooler.jpg.html

 

[rolli59]

Reseat everything GPU, ram, power connectors, possibly you bumped something replacing the PSU.

 

[CaseyR]

Reseat everything GPU, ram, power connectors, possibly you bumped something replacing the PSU.

i did already still no display i tried with both psu's

 

[rolli59]

Now we are btween the card and the motherboard. Can you try the card in another computer? Or do you have onboard and can you try connecting that to the monitor instead of the card? You may have to remove the card to get the motherboard connections to work.

 

[CaseyR]

Now we are btween the card and the motherboard. Can you try the card in another computer?

both cards were working right before i switched the psu but yes i tried them in another computer they still work

 

[rolli59]

Look at my edit above with onboard!

 

[CaseyR]

Look at my edit above with onboard!

yea i tried the on board vga still nothing tried it with both psu's

 

[rolli59]

Did you reset CMOS after removing the card?

 

[CaseyR]

Did you reset CMOS after removing the card?

the blue little things? no i didnt or can i just take the battery out cause i can get to the battery a lot easier

 

[rolli59]

Yes just take the battery out for 30sec min before putting it in switch of or disconnect PSU and hold down power button on the case for couple of seconds.

 

[CaseyR]

Yes just take the battery out for 30sec min before putting it in switch of or disconnect PSU and hold down power button on the case for couple of seconds.

still no display with the card or without but i got a beep like starting windows beep

 

[rolli59]

Looks like the board died then it is not displaying but should with onboard after setting CMOS and the card removed from the computer.

 

[CaseyR]

Looks like the board died then it is not displaying but should with onboard after setting CMOS and the card removed from the computer.

any way to fix that cause its my dad's pc not mine

 

[rolli59]

Not without replacing the board I believe.

 

[CaseyR]

Not without replacing the board I believe.

is it possible to get the same board

 

[CaseyR]

ok i got old psu and card working idk why the new psu wasnt but im not trying to do it again but thanks for help

 

[CaseyR]

ok i got old psu and card working idk why the new psu wasnt but im not trying to do it again but thanks for help

 

[rolli59]

So bad contact on something, reseating often works.