pump and reservoir

[GQmer Nomi]

hi
i have all things i need for watercooling but i didnt choose yet pump + rese

can u give me ur opinion here frozencpu.com or here http://www.ekwb.com/shop/

and any other things i need ?
thxx

 

[rubix_1011]

Can you list your components, both hardware and what you have so far in your watercooling loop? Have you looked through the pump descriptions in the watercooling sticky? What are your loop needs in terms of a pump?

 

[saint19]

As rubix_1011 says, we need to know the components that you want to cool in the loop. It's not the same buy a reservoir and pump for just a CPU that buy the same components for CPU + GPU (or even SLI/Xfire)

 

[GQmer Nomi]

Can you list your components, both hardware and what you have so far in your watercooling loop? Have you looked through the pump descriptions in the watercooling sticky? What are your loop needs in terms of a pump?

corsair 900d

480x2 radiator
2x780ti
4930k
i wold like 2 loop if it is better or not ?

and i want change my 900d to better case or stick with it ?

 

[GQmer Nomi]

As rubix_1011 says, we need to know the components that you want to cool in the loop. It's not the same buy a reservoir and pump for just a CPU that buy the same components for CPU + GPU (or even SLI/Xfire)

corsair 900d

480x2 radiator
2x780ti
4930k
i wold like 2 loop if it is better or not ?

and i want change my 900d to better case or stick with it ?

 

[rubix_1011]

Seems a bit excessive to run 2x 480 radiators, but if you can and already have them, it won't hurt anything. It might be difficult to find a way to mount them, unless you have a case with this capability. I am assuming you are going to run waterblocks on the 780's? What blocks? What CPU block? What radiators did you choose?

 

[saint19]

As rubix_1011 says, we need to know the components that you want to cool in the loop. It's not the same buy a reservoir and pump for just a CPU that buy the same components for CPU + GPU (or even SLI/Xfire)

corsair 900d

480x2 radiator
2x780ti
4930k
i wold like 2 loop if it is better or not ?

and i want change my 900d to better case or stick with it ?

Nice build.

Well, independent of the waterblocks that you select and other components of the loop you need to keep in mind this.

1) Pump always need liquid inside or will goes dead.
2) 2x480 seems excessive for me (just image 8 120 fans running at the same time)

I think that you are safe to go with:

1) Reservoir, maybe dual bay...(XSPC brand)
2) A very good pump. Swiftech MCP 655 Vario (or MCP655B). Comes with speed controller
3) Primochill tubing (PrimoFlex series)
4) 2*360mm radiator. Swiftech maybe
4) For waterblocks...EK Waterblocks or Heatkiller are prefer.

Loop order?

Reservoir > Pump > CPU > Radiator 1 > GPU 1 > GPU 2 > Radiator 2 > reservoir

Regarding the case:

The only thing more bigger than that D900 are the Little Devil's...take a look of them but 1st check since you can install both 360mm radiator inside the 900D

 

[GQmer Nomi]

As rubix_1011 says, we need to know the components that you want to cool in the loop. It's not the same buy a reservoir and pump for just a CPU that buy the same components for CPU + GPU (or even SLI/Xfire)

corsair 900d

480x2 radiator
2x780ti
4930k
i wold like 2 loop if it is better or not ?

and i want change my 900d to better case or stick with it ?

Nice build.

Well, independent of the waterblocks that you select and other components of the loop you need to keep in mind this.

1) Pump always need liquid inside or will goes dead.
2) 2x480 seems excessive for me (just image 8 120 fans running at the same time)

I think that you are safe to go with:

1) Reservoir, maybe dual bay...(XSPC brand)
2) A very good pump. Swiftech MCP 655 Vario (or MCP655B). Comes with speed controller
3) Primochill tubing (PrimoFlex series)
4) 2*360mm radiator. Swiftech maybe
4) For waterblocks...EK Waterblocks or Heatkiller are prefer.

Loop order?

Reservoir > Pump > CPU > Radiator 1 > GPU 1 > GPU 2 > Radiator 2 > reservoir

Regarding the case:

The only thing more bigger than that D900 are the Little Devil's...take a look of them but 1st check since you can install both 360mm radiator inside the 900D

what reservoir i need do i go with res integred with pump or what and do i need 2 pump ?

and also i buy this fans Noctua Industrial NF-F12 2000 rpm
im asking if can can make them quiet with fan controller

 

[GQmer Nomi]

Seems a bit excessive to run 2x 480 radiators, but if you can and already have them, it won't hurt anything. It might be difficult to find a way to mount them, unless you have a case with this capability. I am assuming you are going to run waterblocks on the 780's? What blocks? What CPU block? What radiators did you choose?

480 monsta radiator
and also i buy this fans Noctua Industrial NF-F12 2000 rpm
im asking if can can make them quiet with fan controller

i wanna 2 loop reservoir with 2 pump if i can find him in frozencpu

 

[rubix_1011]

You are running 2 Monsta (AlphaCool?) rads, or plan to? Or only 1?

You can use whatever reservoir you want, it depends if you want a bay res, cylinder res or pump/top res. Are you going with the Swiftech/Laing/D5 or something else?

 

[saint19]

As rubix says, you can go with any component that you want...

You can use the fan controller, that would give you some room for lower the noise when you are not using the rig at full load.

Check this reservoirs:

1) http://www.frozencpu.com/products/18524/ex-res-483/XSPC_Dual_525_Bay_-_DDC_Dual_Pump_Dual_Split_Reservoirs_-_Clear_w_Two_DDC_Installed_DDCBAYTWO-2PUMP.html?tl=g59c677s2165
2) http://www.frozencpu.com/products/16820/ex-res-414/XSPC_Twin_D5_Dual_525_Bay_Clear_Reservoir_-_Dual_Laing_D5_MCP655.html?tl=g59c677s2165#blank

1st one use dual MCP 355 pumps while 2nd one use MCP 655 pumps...your choice.

 

[GQmer Nomi]

As rubix says, you can go with any component that you want...

You can use the fan controller, that would give you some room for lower the noise when you are not using the rig at full load.

Check this reservoirs:

1) http://www.frozencpu.com/products/18524/ex-res-483/XSPC_Dual_525_Bay_-_DDC_Dual_Pump_Dual_Split_Reservoirs_-_Clear_w_Two_DDC_Installed_DDCBAYTWO-2PUMP.html?tl=g59c677s2165
2) http://www.frozencpu.com/products/16820/ex-res-414/XSPC_Twin_D5_Dual_525_Bay_Clear_Reservoir_-_Dual_Laing_D5_MCP655.html?tl=g59c677s2165#blank

1st one use dual MCP 355 pumps while 2nd one use MCP 655 pumps...your choice.

i want that dual pump mcp 655 + dual reservoir can give me dual loop like this one

http://www.frozencpu.com/products/16820/ex-res-414/XSPC_Twin_D5_Dual_525_Bay_Clear_Reservoir_-_Dual_Laing_D5_MCP655.html?tl=g59c677s2165#blank

but dual loop not one loop

 

[GQmer Nomi]

You are running 2 Monsta (AlphaCool?) rads, or plan to? Or only 1?

You can use whatever reservoir you want, it depends if you want a bay res, cylinder res or pump/top res. Are you going with the Swiftech/Laing/D5 or something else?

one monsta and the other gtx both 480

i want bay res with 2 pump and 2 loop

 

[rubix_1011]

Either way, you are running overkill on radiators...that single Monsta would be more than enough for the entire loop. Even if you plan to overclock your CPU to high levels, you wouldn't need a dedicated 480 radiator of those magnitudes to cool it. If this were me, personally, here is what I would do:

Find a case that will fit a 480 radiator.
Go with 2x DDC pumps like the MCP35x2
Use the Monsta 480, run strong fans with shrouds if you have the room
Run 1/2" ID tubing and fittings, full cover GPU blocks. You can run parallel or serial on the GPUs.