Pure Carbon Could Solve All Your Heat Disspipation Worries

  • Thread starter Thread starter Guest
  • Start date Start date
Toggle sidebar Toggle sidebar
Status
Not open for further replies.
Graphene thermal paste, graphene heatsinks, graphene heatpipes, graphene cooling fins and eventually graphene transistors. Yay for no more bulky and heavy air/water cooling setups for monster overclocking.

Then again, we'll find a way to necessitate a bulky air/water setup even with grahpene...
 
So that which is supposedly keeping the heat in (carbon in the atmosphere = global warming) is now going to have the opposite effect in electronics? Interesting.
It also seems the days of the silicon wafer are numbered.
 
If it conducts heat so well, link the Graphene to the chassis of the case and dissipate the heat through that? But the cases would kinda have to be Aluminium or some other good heat conducting material.. :\
 
Could this mean the return of the high-end single-slot graphics card? Probably not since they'll just clock the things so high they'll still need dual-slot coolers :-(
 
[citation][nom]Big_Davos[/nom]So that which is supposedly keeping the heat in (carbon in the atmosphere = global warming) is now going to have the opposite effect in electronics? Interesting. It also seems the days of the silicon wafer are numbered.[/citation]
Carbon dioxide is very different from grapheme. CO2- trap heat vs graphene- good conductor.
 
*smacks head against desk*

It's been well known in materials science and engineering circles for years that diamond, aka carbon, is the best heat conductor known. What makes diamond unusual is that it's a great electrical insulator while being a great heat conductor (this is counter-intuitive as good heat conductivity and good electrical conductivity go hand in hand, except with carbon).

The whole reason we don't have diamon heat sinks is because of the diamond consortiums like De Biers. Artificial diamond is indistiguishable from natural diamond when grown properly (and GE knows how to do it). As such, the diamond consortiums have leaned hard on the producers of artificial diamonds. One can only hope that this changes.
 
I totally sing up for a diamond heat sink. But, by the time we get them, we are going to be in 10mm features on the silicon chips, with very low voltages. this means the chips may work fine in normal temperature. we may not need them by the time they come around. My phone does not have a huge copper heat sink, and 5 years from now those are the chips we'll be running on the servers and desktops.
 
[citation][nom]Big_Davos[/nom]So that which is supposedly keeping the heat in (carbon in the atmosphere = global warming) is now going to have the opposite effect in electronics? Interesting. It also seems the days of the silicon wafer are numbered.[/citation]


Stupidest comment of the month.
 
While for sure heat is important, let's remember that this won't effect battery life. So while this is certainly useful, we are still stuck with relatively low powered devices in mobile units, at least until something can be done on that front.

I see this to be less useful in mobile devices than in OC'd systems where people are trying to max out their system performance. Not that I am saying it is useless in laptops and tablets since it obviously isn't.
 
[citation][nom]joytech22[/nom]If it conducts heat so well, link the Graphene to the chassis of the case and dissipate the heat through that? But the cases would kinda have to be Aluminium or some other good heat conducting material.. :\[/citation]

The problem is that graphene isn't stiff, it's like super flexible paper that's tougher than steel. You'd have to stretch it over a frame. That would also be a problem since there has to be a way to connect the case to the components for proper cooling.
 
Basically they use this to make a thin layer for thermal interface materials. Once manufacturing capability is good they can further create graphene heat pipes which would further enhance it's thermal transfer capabilities.
 
"could essentially prevent laptops and other electronics from overheating and enable chip companies and
device manufacturers to pack much more powerful chips into mobile devices."

Not without a fan that has a good air supply. Like say a laptop that just has 1 suction vent and you put in on your bed....
 
[citation][nom]A Bad Day[/nom]Graphene thermal paste, graphene heatsinks, graphene heatpipes, graphene cooling fins and eventually graphene transistors. Yay for no more bulky and heavy air/water cooling setups for monster overclocking.Then again, we'll find a way to necessitate a bulky air/water setup even with grahpene...[/citation]

in all honesty when Graphene is finalized and it is actually put out of the consumer products, you probably won't be able overclocked it. I remember reading about how Graphene is able to handle speeds that come close to light.
 
Start mass producing this shit son. The market for this shit is huge, and includes damn near everybody. The cost to set up fabs for the material is astronomical, but the payoff is even bigger.
 
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom