I fairly recently put together a new pc for myself and it was working fine. The components were
Motherboard: ASRock X58 Extreme
Graphics: EVGA 560 Ti SLI
RAM: Corsair XMS3 PC3 12800 DDR3 3x2 gb
Hard Drives: Two Hitachi 320 gb in RAID 0
Case: Antec Nine Hundred Two
Monitor: Samsung BX2231
PSU: Apevia Warlock 900w
This computer worked fine, but was very crowded in the mid tower case i had so i ordered the HAF X. Also, the Apevia Warlock 900w psu wasn't the most stable PSU so i ordered the Corsair 1200AX which i know is overkill, but it is also future-proof for later upgrades. I moved all of the components to the new case and set it all up, but when i turn on my pc, the debug light (which on the ASRock X58 Extreme is a combination of two letters or numbers to tell you what is happening with the motherboard at any given time) flashes then turns off. At first I thought, possibly a defective PSU(the new corsair one), so i tested the system out with the older Apevia 900w and still the same problem. I again tested the system with a different 500w psu i had lying around(i removed one of the 560 Ti's when i did this) and still the same problem. After turning the computer on, I found out that it was not possible to turn it off even at the motherboard power switch inside the case on the motherboard itself. the only way to turn it off was to turn off the power supply itself in the back of the case. Also, adding to the confusion i am having, all of the fans and items connected to the motherboard run when the computer is turned on, the hard drives turn on, the graphics cards turn on, and all fans connected to the motherboard turn on. I believe it is a motherboard problem but i am not sure. Can anyone else tell me what might be wrong?
Edit: My CPU is an Intel I7 950
Motherboard: ASRock X58 Extreme
Graphics: EVGA 560 Ti SLI
RAM: Corsair XMS3 PC3 12800 DDR3 3x2 gb
Hard Drives: Two Hitachi 320 gb in RAID 0
Case: Antec Nine Hundred Two
Monitor: Samsung BX2231
PSU: Apevia Warlock 900w
This computer worked fine, but was very crowded in the mid tower case i had so i ordered the HAF X. Also, the Apevia Warlock 900w psu wasn't the most stable PSU so i ordered the Corsair 1200AX which i know is overkill, but it is also future-proof for later upgrades. I moved all of the components to the new case and set it all up, but when i turn on my pc, the debug light (which on the ASRock X58 Extreme is a combination of two letters or numbers to tell you what is happening with the motherboard at any given time) flashes then turns off. At first I thought, possibly a defective PSU(the new corsair one), so i tested the system out with the older Apevia 900w and still the same problem. I again tested the system with a different 500w psu i had lying around(i removed one of the 560 Ti's when i did this) and still the same problem. After turning the computer on, I found out that it was not possible to turn it off even at the motherboard power switch inside the case on the motherboard itself. the only way to turn it off was to turn off the power supply itself in the back of the case. Also, adding to the confusion i am having, all of the fans and items connected to the motherboard run when the computer is turned on, the hard drives turn on, the graphics cards turn on, and all fans connected to the motherboard turn on. I believe it is a motherboard problem but i am not sure. Can anyone else tell me what might be wrong?
Edit: My CPU is an Intel I7 950