PWR SW and +LED and -LED slots

Status
Not open for further replies.

Paancakes

Prominent
May 21, 2017
3
0
510
Hi, I was wondering where the slots were for the PWR SD and +LED and -LED slots are to connect my motherboard to the case. My motherboard is the Asus Prime B250 Plus and I cannot find where I connect the slots on my motherboard. Please help, thanks.
 
Solution


It's a 15-pin connector group, along the lower right edge of the motherboard, right beside the 2 SATA ports at the corner (the 15 pins are to the left of those 2 SATA ports).

You'd connect the chassis cables like this:

HAF932_Case_MOB_Wires_Connections.jpg


It's a 15-pin connector group, along the lower right edge of the motherboard, right beside the 2 SATA ports at the corner (the 15 pins are to the left of those 2 SATA ports).

You'd connect the chassis cables like this:

HAF932_Case_MOB_Wires_Connections.jpg
 
  • Like
Reactions: poppyjoe
Solution
Status
Not open for further replies.