Here's my set up: asus rampage V extreme,5930k, Samsung 950 pro NVME 512gb, 2x Samsung 850 pro 256gb, 2x nvidia asus strix 980to and a corsair 1200axi psu. I had trouble booting for the first time with a q code CE(this is me first build) and after hooking up the key board and mouse it finally booted to bios. Excited of course, I explore everything checking to see if everything is hooked up right (both my SSD's were showing but it wasn't showing/recognizing my M.2? Possibly not pushed in enough on the M.2 socket?) I changed NOTHING from default. I exited bios wanting to install my OS (Windows 10 usb) the screen went black and I didn't know what to do. So I turned it off and tried it again, every since then I haven't been able to get back into the bios? Am I doing something fundamentally wrong? No error LED's JJST a q code of AA. I've done a lot of reading on this since it's not in the Manuel, everyone is saying its for "All good" but why can't I get a signal? I've checked my display cable, all plugs, idk. Any help would be appreciated. Thanks.