Q-code OC Error on Rampage IV Gene

[dovienson]

Help me. Please. Today my pc error Q-code OC or 0C and no beep, no boot. I hope support from all guy. I don't know. What is error

 

[alexoiu]

Can you test different power supply? Have you tried clearing the CMOS?

 

[jr9]

It means "Reserved for future AMI SEC codes", which doesn't really give you anything. You can thank ASUS for that.

Is this a new build? Was it working fine before?

I don't see any RAM installed unless it's hidden in the darkness. It's not going to start without RAM.

 

[dovienson]

Can you test different power supply? Have you tried clearing the CMOS?

I has try hit CLR CMOS on mainboard. But it again with Q-code OC

It means "Reserved for future AMI SEC codes", which doesn't really give you anything. You can thank ASUS for that.

Is this a new build? Was it working fine before?

I don't see any RAM installed unless it's hidden in the darkness. It's not going to start without RAM.

When uninstalled RAM or VGA. Mainboard error with beep code.After installed no beep it show Q-code OC. Before install hardware . I hit CLR CMOS. But again, so what is error

 

[jr9]

0C doesn't mean anything. It means "Reserved". ASUS didn't give it a name. All it tells you is that a piece of hardware is stopping your PC from starting. The culprits are motherboard, processor, RAM, GPU, or PSU.

If you are getting OC with RAM and GPU installed. I'd first try moving the GPU to a different slot. I'd also try just one stick of RAM in all the slots to see if you can get past 0C. If that doesn't work and neither did a CMOS reset I'd strip it down to just CPU+motherboard+PSU and start adding things and seeing if the debug code changes to try and determine which part is the issue.

 

[dovienson]

0C doesn't mean anything. It means "Reserved". ASUS didn't give it a name. All it tells you is that a piece of hardware is stopping your PC from starting. The culprits are motherboard, processor, RAM, GPU, or PSU.

If you are getting OC with RAM and GPU installed. I'd first try moving the GPU to a different slot. I'd also try just one stick of RAM in all the slots to see if you can get past 0C. If that doesn't work and neither did a CMOS reset I'd strip it down to just CPU+motherboard+PSU and start adding things and seeing if the debug code changes to try and determine which part is the issue.

I fixed problem. But after turn off PC and wait 30 minutes hit power on then it repeated