Question [Q] How to have M.2 wifi card tight enough for the cables to antenna?

[hd_scania]

I recently have an ASRock AMD X300 DeskMini barebones system w/in the M.2 wifi card already plugged on the mainboard, but whose cables to the antenna aren’t tightened at all, but never properly tightly connected
And i looked at my own ASRock manuals and a few YTube tutorials as well, but nothing points to M.2 card to antenna cables connections ... I just don’t have ideas to tighten up those M.2 to antenna fine cables, which i’m almost done installing that wifi card on the system

 

[kerberos_20]

one side gets plugged into m2 board
another side gets mounted on pc case

at which side of cable you have connection issue?

 

[bill001g]

Do you mean the connectors on the m.2 card itself. Those I think only people with tiny fingers can install easily. They are simple snap in connections, you try to get it aligned exactly and then push down and it snaps in place.
If you pull gently on the wire it will not come out but you can rotate them which does not seem to cause any issues.