Question Q-led d-ram always on | no post

[RiverMelone]

My build:

• Mobo: Asus Rog Strix B550-F Gaming WiFi II
• CPU: Ryzen 7 5800X
• RAM: Corsair Vengeance RGB Pro SL 32GB (2x16gb) 3600mHz C18
• GPU: RTX 3070 Ventus 3x
• PSU:Corsair RM850

HI, I still don’t know what really happened, it seemed like a power surge or an outage. As the title of the post says, I’m encountering a problem with my build, the q-led for the d-ram (most of the times, when I power on my pc stays on without post, and sometimes it goes from orange (d-ram), red (cpu) and stays on white (vga) always without post [this happens only with one slot of ram].

Searching on the internet, I tried everything that I could try, here’s a list of what I did:

• Removed and re-connected all the cables;
• Removed and reconnected all the parts;
• Removed the battery of the mobo;
• Started without the battery;
• Changed the battery;
• Reset the CMOS;
• Updated the bios through the bios flashback;
• Started the pc with only one slot of ram (it I power it on and off continuously sometimes it pass the orange q-led, but still no post, going into the red q-led and then the white one, but still, again, no post.
• It could also happen that sometime, when both rams are installed, it goes from orange to red and then all the q-leds turns off and doesn’t boot.

With all those things nothing gave me a screen boot, always no signal on the monitor.

 

[rgd1101]

you mean the qled on the ram turn on then off and go to the red cpu?
or the orange led stay on

 

[RiverMelone]

you mean the qled on the ram turn on then off and go to the red cpu?
or the orange led stay on

Depends on the cases. If I have 2 slots of ram installed, I always get the d-ram error, but if I boot it with only one slot, sometimes it skip the problem of the orange led, goes to the red led (cpu) and stops at the white one (VGA).