q6600 OC

[jeepn]

I just wanted to know what you guys are clocking to, voltages, temps, etc... I downloaded SpeedFan, CPU-Z, Orthos, 3DMark06 (11667), and Core Temp. Which Temp monitor program has the most accurate temps? Right now for the CPU (1333x9) for 3.0GHz, Im getting mid 60s at load/ 50s idle @ 1.3250v. Any help would be appreciated as the e6600 OC Guide isnt specifically for the q6600. I did remove the stock CPU/NB/SB HSF goop and applied Arctic Ceramique using the website directions. Im new to the OC arena. Peace :twisted:

 

[graysky]

I just wanted to know what you guys are clocking to, voltages, temps, etc... I downloaded SpeedFan, CPU-Z, Orthos, 3DMark06 (11667), and Core Temp. Which Temp monitor program has the most accurate temps? Right now for the CPU (1333x9) for 3.0GHz, Im getting mid 60s at load/ 50s idle @ 1.3250v. Any help would be appreciated as the e6600 OC Guide isnt specifically for the q6600. I did remove the stock CPU/NB/SB HSF goop and applied Arctic Ceramique using the website directions. Im new to the OC arena. Peace :twisted:

I have a vdroop modified P5B-Del; voltage load = voltage idle = 1.232v. The BIOS voltage is 1.2375v. It is >6h 2x othos stable. I stopped running it after 6 h.

Cooling is a lapped Ultra-120 Extreme and the IHS on the CPU is also lapped.

You'll probably wanna lapp your IHS as well as your HS. Dropped by temps by 7-10 °C by doing so.

 

[jeepn]

I also looked at my batch number... its got a big fat "F" in it. Just super... I guess installing my WC set up will be mandatory to get any kind of low temps out of it. Ive just been putting it off because Ive never installed one before. Peace :twisted: