I have OC my Q6600 to 3.0 with these setting
0608 BIOS
Vcore 1.33125v
Memory Voltage 2.013v
NB Core Voltage 1.393v
Vcore Offset Voltage [Auto]
FSB - Memory clock mode: Unlinked
[FSB 1333]
[Ram 667]
Memory Timing: 4-4-4-12-1T
I start with Vcore 1.375 and then lower it down. at 1.325v, the system is unstable. The system restarted within 2 minutes running prime95. So I up the Vcore 1 bracket to 1.33125v.
I have ran prime95 for 10 hours, and passed all tests. The only thing that bothers me, is the max temperature is 68C on 2 cores, shown HWMonitor 1.10; and 66C on other 2 cores.
What you guys think about this temperature? I am using a Rosewill RCX-Z4 CPU Cooler, in a Nine Hundred case. The 200mm Bigboy fan on the top is not working at the moment. The fan blade is hitting the case, so I unplugged the fan. I don't know how to take the fan out and reposition it :/ I ordered another 120mm fan to install on the side vent, but I am not sure if it will help the CPU.
0608 BIOS
Vcore 1.33125v
Memory Voltage 2.013v
NB Core Voltage 1.393v
Vcore Offset Voltage [Auto]
FSB - Memory clock mode: Unlinked
[FSB 1333]
[Ram 667]
Memory Timing: 4-4-4-12-1T
I start with Vcore 1.375 and then lower it down. at 1.325v, the system is unstable. The system restarted within 2 minutes running prime95. So I up the Vcore 1 bracket to 1.33125v.
I have ran prime95 for 10 hours, and passed all tests. The only thing that bothers me, is the max temperature is 68C on 2 cores, shown HWMonitor 1.10; and 66C on other 2 cores.
What you guys think about this temperature? I am using a Rosewill RCX-Z4 CPU Cooler, in a Nine Hundred case. The 200mm Bigboy fan on the top is not working at the moment. The fan blade is hitting the case, so I unplugged the fan. I don't know how to take the fan out and reposition it :/ I ordered another 120mm fan to install on the side vent, but I am not sure if it will help the CPU.
Facebook
Twitter
Instagram