Q6600 overclocking help

[moha123]

am asking if i could over clock my CPU to any MHZ better than 2.4 , just the only problem am using the stock fan my temp is 36 38 32 31 overall 27 in non load i dunno if i can over clock or not and if i could how could i over clock and how much ?
am using
Mother board Gigabyte P31
3 giga ram
Ati 4850 1 giga
PSW hec 500 wtt
please help me ,sorry for my bad English!!!!
thanks in advance

 

[Guest]

you could probably get that atleast up to 2.6 GHz with what you have. It would help a lot if you got a better cooler or mobo, but your system should be able to handle it.

 

[Guest]

Hi,

Try this Q6600 @ 3.1 rock stable

raise CPU voltage to 1.3125v
set fsb to 345 * 9 = 3108
memory @690
add +0.15 to your mem voltage / mine is 1.95v (1.8+0.15)
disable hyperpath3
keep other on auto
OC ratio 1:1

check the temperatures,
stock cooler should be good enough...

Let me know how it goes<

 

[moha123]

thanks guys i will try your way satenciatko but
i over clocked my CPU now to 3.0
and when i open CPU-Z i find the multiplier not stable sometimes it be 6 and sometimes its 9
so the core speed some times is 333*6 = 2 Ghz and some times 333*9= 3 Ghz i dunno what is that, should it be like this and when there's stress it become 9 !!!!!!! thanks in advance

 

[Guest]

disable * Intel Speed Step in BIOS - it is changing multiplier ...
disable * Enhanced C1 Control in BIOS

 

[moha123]

i couldn't find any of them found something call CPU enhanced halt(CLE) i disable it and still the problem occur

 

[moha123]

i set every thing to default and the weird thing that i find the multiplier still changing !!!!!!! is it the normal thing or there's a problem in my CPU please help mee !!!!

 

[Guest]

In your bios it is called: CPU EIST function

Enhanced Intel SpeedStep® Technology

http://www.xbitlabs.com/images/mainboards/ga-ep35-ds4/bios_advanced.jpg

Let me know how it goes...

 

[moha123]

thanks for your help but i disabled it and still have the same issue !!!!! am very worried now 🙁 !

 

[moha123]

finally it worked i disabled EIST and the C1E thing and its 9 x now all the time thanks very very much satenciatko for your help

 

[Guest]

you are welcome....enjoy your 30%+ overclock.

you can go higher, but in that case I would recommend new cooler...

I found 3.1 as pretty good overclock ...

going up means higher watt consumption, more heat...

TAKE CARE

 

[moha123]

btw wt i used that way to overclock it doesn't need high volt u can check it http://www.youtube.com/watch?v=Mjz5h2yGJuc&feature=related