kg4icg

Distinguished
Mar 29, 2006
506
0
19,010
The question is though how high are you trying to overclock and do you really need to take it up to higher voltages?
ronsfolding.jpg
 

Correct, IIRC. They will run fine at that voltage, unlike the 45nm parts which have a max voltage of 1.3675 according to Intel. Also, you can slightly exceed those recommendations and still be fine. I'd feel comfortable up to about 1.4V on a 45nm part, and 1.55V on a 65nm part. Of course, this assumes good temps.