[SOLVED] Q9400 Auto OC

[Emiboss]

Since i reseted the bios my cpu is auto oc'ing himself...i have no idea why.


PS:Sorry if i posted in the wrong forum

 

[tennis2]

Your FSB is 400MHz/1600MHz (400x8=3.2GHz CPU). Stock is 333MHz/1333MHz (333x8=2.66GHz CPU). Voltage is still at stock, so that's good. FREE SPEED!!!

I'd leave it where it's at as long as your FSB:RAM multiplier is still running your RAM at the correct/advertised speed. Other than that, it's perfectly safe where it's at.

 

[Azzyasi]

No problem, just check the temperatures under full load (do a stress test in cpu-z in bench tab if you don't have prime95 or orthos64)

Nice to still see the 775 platform in use.
Here is mine:

 

[Emiboss]

Your FSB is 400MHz/1600MHz (400x8=3.2GHz CPU). Stock is 333MHz/1333MHz (333x8=2.66GHz CPU). Voltage is still at stock, so that's good. FREE SPEED!!!

I'd leave it where it's at as long as your FSB:RAM multiplier is still running your RAM at the correct/advertised speed. Other than that, it's perfectly safe where it's at.

Thanks,its running at correct speed

No problem, just check the temperatures under full load (do a stress test in cpu-z in bench tab if you don't have prime95 or orthos64)

Nice to still see the 775 platform in use.
Here is mine:

I think its fine at 70C
Also can i remove the ventilator and clean the dust behind it?(im afraid im gonna damage it)