Quadro P2000 not detected by motherboard GA Z370 hd3

[petr.pakosta]

I managed to install win 10 on M2 disk but BIOS and Windows are not able to find graphic card Quadro P2000.... Is it UEFI compatible? (I think that it should be)... I have setup of CMS disabled. I guess that it's somehow connected with UEFI but I tried many combinatios without success. Any advice please?

EDIT: I tried the GPU in different PC and it works normally

 

[alexoiu]

Have you tried installing the graphics driver https://www.nvidia.com/download/driverResults.aspx/115280/en-us

 

[petr.pakosta]

Thank you. Yes, but directly on the beginning it says that no nvidia product is available...

 

[alexoiu]

You're welcome. Have you tested the second pcie slot?

 

[petr.pakosta]

Not yet. I will try but I guess it's useless In MB manual they recommend to use the first one

 

[alexoiu]

Just to rule out a slot related issue.

 

[petr.pakosta]

I tried that after changes in BIOS to slot 2 and rebooting the PC went to complete breakdown… but after re-install it goes Ok but again without the new GPU

 

[alexoiu]

Can you test different graphics card? If working, then it might be a compatibility issue.

 

[petr.pakosta]

Thank you. Strange... I tested it with GIGABYTE GeForce GT 1030 and with the same result (nothing). Q2000 is a relatively new one, it should be compatible...

 

[alexoiu]

No problem.
It could be a board, or CPU issue. Try returning them, as defective.

 

[petr.pakosta]

Than you for your kind help! I mean too that it's a hardware issue... On the very end LAN controller stopped running.

 

[alexoiu]

You're welcome.