Question on the Q6600 GO

[kazeus]

Hi. Just recently gone to oc quad of my little bros. I am not sure if the temps shown by realtemp are correct and if yes why are they so low. Below is the link for the screenshot if anyone can share on it please do.

http://img26.imageshack.us/img26/7871/beztytuulxd.jpg

Basically I was expecting higher load temps with 1.5Vcore plus idel is at 31-34 so its not really that much of a difference between load. Ambient around 20C. Using the antec 900 and coolermaster v8.

Thanks to all.

 

[kazeus]

Sory. Forgot to mention that temps are taken while under prime95 blend test for approx 30mins.

 

[rochin]

Good temps. If it gets to 70 then you have a problem. Nice oc.

 

[Fruity]

Flippin eck. I dream of temps like that on my Q6600! Right i'm off to lap my CPU.....

 

[bakedcpu]

To see the max, you should really run Small FFTs for awhile, about 40min to see how high it will go (of course the longer the better). I dont think you will see the max with blend test. Another program that will max out your cpu temp is Intel Burn Test. It will usually up your temp by about 4-5C compare to prime small FFTs.

 

[kazeus]

bakedcpu thanks for this input. I will most definately do that!