Question Question Will this overclock damage my gpu, or is it too weak?

[Poofin420]

This is my first time overclocking anything, and I have some questions.
I used EVGA Precision Xoc and MSI Afterburner. (All the info is in the picture, I just didn't know that you could upload photos). (third time post attempt bc debilitated).

In precision X the voltage percentage is set to 90%.
-Power target 116%
-Temp target 91 C
-Gpu clock offset +258
-Mem Clock offset +175
-The fans are set to 90%
Question: If I turn on auto, will the fans spin according to the fan curve? My fan curve goes from 40% to 70% at 50 C, 80% at 70C, and 99 at 90C.

In MSI Afterburner my power limit is also, 116
-Temp Limit 91C
-Core clock (MHz) +258
-Memory CLock +175

Thank You!

 

[NightHawkRMX]

Only use one overclocking utility at a time. Auto fans will use factory curve.
That seems like a reasonable overclock. Make sure it is stable with a program like valley benchmark.
What is your full system specs including PSU and GPU?

 

[Poofin420]

Only use one overclocking utility at a time. Auto fans will use factory curve.
That seems like a reasonable overclock. Make sure it is stable with a program like valley benchmark.
What is your full system specs including PSU and GPU?

Thank you for replying.
I've tested the overclock on Unigine Heaven multiple times and there weren't any problems.
I use an: EVGA 500W Bronze PSU
-CPU is an intel core i5 7500 (prob the weakest part of my setup).
-Motherboard: B250M Bazooka
-Ram: 1 stick, 8gig, 2400, ddr4 Ballistix
-Storage: 1TB Seagate Barracuda Hard Drive
I have my GPU fans set to 90% speed, will that wear the fans out quickly.

Again, thank you for answering, I was getting a fire extinguisher ready just in case.

 

[NightHawkRMX]

Haha, modern quality hardware will have many protections so it is hard to damage (or catch on fire).
90% fan speed shouldn't wear them out too fast. It might just be a bit loud.
PSU should be fine for a GTX 1060 overclocked.

 

[NightHawkRMX]

I would not overclock the GPU with 2 programs at once, even with identical settings.

 

[Poofin420]

I would not overclock the GPU with 2 programs at once, even with identical settings.

All right, I'll uninstall Afterburner.

Thanks!