Question with the Lighting node pro.

[animefan8910]

Okay so I have a question I just put my gaming rig together with my brother the other night and we stayed up till 4 in the morning to do it. Well the cable management is terrible and I mean the worst you ever seen. and my brother stuffed cables in the PSU compartment and zip tied them with the smallest zip ties you could probably find. Computer is working fine. Only one problem I forgot to install lighting node pro. Good news is I have a controller on my Gamdias M1 talos case in the back.will the lighting node pro work with that? I also have a Gamdias controller for my liquid cooler that I could still reach.

 

[animefan8910]

bump

 

[g-unit1111]

I am not too familiar with that case but I am very familiar with the Lighting Node Pro. You can test your controller and at least one or all of the strips outside of the case if your motherboard has a free USB 2.0 internal header and you have a free SATA cable. If you can do that, and it works, then you can install it.

Also, you should definitely clean up those cables.

 

[animefan8910]

I am not too familiar with that case but I am very familiar with the Lighting Node Pro. You can test your controller and at least one or all of the strips outside of the case if your motherboard has a free USB 2.0 internal header and you have a free SATA cable. If you can do that, and it works, then you can install it.

Also, you should definitely clean up those cables. [/quotemsg

The problem is that getting those cables out may not be possible without breaking a pin on the motherboard lols, but I am thinking of just getting a magnetic 2M led for 20 bucks from phantek and just hook it up though my RGB header

 

[g-unit1111]

The problem is that getting those cables out may not be possible without breaking a pin on the motherboard lols, but I am thinking of just getting a magnetic 2M led for 20 bucks from phantek and just hook it up though my RGB header

You'd have to be doing something really stupid to break or bend the internal USB headers on your motherboard. It is possible and it does happen but if you are careful you shouldn't have a problem.

 

[animefan8910]

The problem is that getting those cables out may not be possible without breaking a pin on the motherboard lols, but I am thinking of just getting a magnetic 2M led for 20 bucks from phantek and just hook it up though my RGB header

You'd have to be doing something really stupid to break or bend the internal USB headers on your motherboard. It is possible and it does happen but if you are careful you shouldn't have a problem.

It's just too much of a mess I got some progress last night, but it's just useless. I might just have a pro do it and have him install it.