R4 Fractal Power Sw question

[Snow Mandalorian]

Hey all, I just moved to a Fractal R4 and I *think* I connected everything properly, but the computer won't power on. My only guess is it has something to do with the R4 power switch cable being smaller than my motherboard's. Here's what I mean:




Notice that the case cables don't fully cover the white panel. Could this be the cause? If so, what can I do?

 

[ihog]

Could you post the make and model of the motherboard as well as the size (how many pins) of the power switch cable?

 

[Snow Mandalorian]

Could you post the make and model of the motherboard as well as the size (how many pins) of the power switch cable?

Here are the serial numbers on the motherboard's sticker:

61-MIBDR1-03 MB1

And this number is right under the barcode:

PG130003MB 100008A

The PSU plugs into the motherboard via a 24 pin connector.

The actual power panel has 20 pins.

Hope that's the info you need. I just for the life of me can't get it to work. :-/

 

[ihog]

I actually mean the power switch cable of the case. And that's not the make and model. It would be something like "ASUS H81M-A."

 

[Snow Mandalorian]

The power switch of the case only has two pins. A black and a red.

The motherboard's light is green, if that's helpful to know. I went over everything again, took out the motherboard and made sure there's no metal touching it from behind, the power cables are all plugged in, etc. The power supply is also only a month old, and it was working perfectly prior to switching over to the new case. I'm just not sure what could be wrong.

 

[ihog]

I need to know the motherboard make and model so I can look up its manual to see where the cables go.

In the mean time, try moving those two cable on the right one pin to the left.