R9 280X - no crossfire options

Tommy Shiels

Reputable
Dec 31, 2014
39
0
4,540
Hi All,

Having problems setting up crossfire. Been looking through forums but no solutions yet.
I have a Sapphire 4GB R9 280X and a MSi 3GB R9 280X Twin Frozr.

I have done clean installs of drivers and software. Swapped cards over PCIE16X lanes.
Disabling and enabling.
Connect bridge both ways round
No settings in BIOS that relate to crossfire.

There are no options showing in Radeon nor in Catalyst Interfaces to enable cross fire.
My MSi is showing 'Primary'' and Sapphire showing as 'Disabled'.
However both operate normally when plugged into monitor and controllable from Radeon software

Build
AMD 9590FX
16GB HyperX Fury
Asus Crosshair V Formula Z Mobo
240GB Crucial SSD
1TB WD Black
1TB WD Blue
 


My Sapphire R9 280X is 4GB. - https://drive.google.com/file/d/0B_2QsoUfNOtAX3UxZkZjYkRyX00/view?usp=sharing
Theres nothing wrong with the GPU's. both are detected by Device manager. both work when plugged into monitor. even simultaneously.