My problem. As the title says.
I bought the card from a local buyer and he said it was working.
I have a GTX 960 and if i plug it in the displays work and it is detected in device manager. If I use the 290 there's no display and the IGPU doesn't work either. Both the 8 and 6 pin are plugged in.
If i check in the device manager (I have VNC on the pc and use laptop to check as there's no display from either) it only shows the microsoft basic video.
My specs =>
i7 6700K
Gigabyte Gaming 3 Z170 motherobard
16 GB(8x2) corsair vengenance ram.
Asus strix GTX 960 (Been using it for 4 Years.)
Antec TP-750W PSU 80+ GOLD
EDIT : The 290 shows sign of water damage on the back of pcb likely by rat piss. And a couple of screws are rusted and something like dusty grease.
I bought the card from a local buyer and he said it was working.
I have a GTX 960 and if i plug it in the displays work and it is detected in device manager. If I use the 290 there's no display and the IGPU doesn't work either. Both the 8 and 6 pin are plugged in.
If i check in the device manager (I have VNC on the pc and use laptop to check as there's no display from either) it only shows the microsoft basic video.
My specs =>
i7 6700K
Gigabyte Gaming 3 Z170 motherobard
16 GB(8x2) corsair vengenance ram.
Asus strix GTX 960 (Been using it for 4 Years.)
Antec TP-750W PSU 80+ GOLD
EDIT : The 290 shows sign of water damage on the back of pcb likely by rat piss. And a couple of screws are rusted and something like dusty grease.