Recently rebuilt a PC, has
i5 4460
2x 8gb RAM
h81 mobo
700w PSU (decent one rated for 648w on the 12v)
sata ssd for boot drive (Windows is NOT installed)
and hhd storage drive
The problem is when i add an R9 Fury x to the system the gpu lights up fans spin and pump turns on and the computer will post and output a display but shortly after will completely freeze up the PC, no errors or anything. I have put the gpu in another completely different system and it worked fine, i have also tried a different gpu in this system and it works fine. I have reset bios and put in a speaker on the off chance of beep codes (didnt get any). I have also reseated gpu, ram and power connectors, when testing the power usage from the wall never went above 150W.
What can i try next?
i5 4460
2x 8gb RAM
h81 mobo
700w PSU (decent one rated for 648w on the 12v)
sata ssd for boot drive (Windows is NOT installed)
and hhd storage drive
The problem is when i add an R9 Fury x to the system the gpu lights up fans spin and pump turns on and the computer will post and output a display but shortly after will completely freeze up the PC, no errors or anything. I have put the gpu in another completely different system and it worked fine, i have also tried a different gpu in this system and it works fine. I have reset bios and put in a speaker on the off chance of beep codes (didnt get any). I have also reseated gpu, ram and power connectors, when testing the power usage from the wall never went above 150W.
What can i try next?