So I decided to swap out the stock cooler for an Arctic Extreme III. The new cooler was missing the 4 screws, so I decided to use zip ties. Needless to say, the cooling was sub-optimal. I decided to put my old stock cooler back. Applied MX-4, and put everything back. Now the card does not boot at all.
Here is what's happening:
Thanks!
Here is what's happening:
- PC turns on. GPU is lit, and fans turning.
- Monitor says "No Signal"
- I re-seated the card and power plug 3 times. No change.
- I cleaned and re-applied MX4 thermal paste. No change.
Thanks!
Last edited: