Putting together new build and all the parts were sealed (except the mobo, why ??)..parts are as follows: (all of these were chosen on pcpartspicker so I know they're compatible)
asus tuf x570-plus wifi,
amd ryzen 3700X cpu,
corsair Vengeance RGB Pro 32GB (2x16GB) DDR4 3200 (PC4-25600) C16,
corsair rm850 gold power supply,
SAPPHIRE PULSE Radeon RX 580 DirectX 12 11265-05-20G 8GB 256-Bit GDDR5 PCI Express 3.0 CrossFireX Support,
Cooler Master Hyper 212 RGB Black Edition CPU Air Cooler, SF120R RGB Fan, 4 CD 2.0 Heatpipes, Anodized Gun-Metal Black, Brushed Nickel Fins, RGB Lighting for AMD Ryzen/Intel LGA1200/1151
ASUS - 27" IPS LCD FHD FreeSync Gaming Monitor (DisplayPort, DVI, HDMI) - Black
anyway, I installed the mobo, cpu & cooler, memory...everything fires up, all good....however, then I add the graphics card plug it in to the power supply, connect the monitor annnd NOTHING...to qualify this, I don't have a speaker in the new case (ordered 1 should be here today) so i can't hear any beep codes. No fans spin on the graphics card at all...it is in the 1st slot on the board closest to the cpu. Could the card be dead as it does nothing when connected to power. Any suggestions woudl be greatly appreciated as I must rma the card with newegg very soon to get a replacement.
thnx,
-Z
asus tuf x570-plus wifi,
amd ryzen 3700X cpu,
corsair Vengeance RGB Pro 32GB (2x16GB) DDR4 3200 (PC4-25600) C16,
corsair rm850 gold power supply,
SAPPHIRE PULSE Radeon RX 580 DirectX 12 11265-05-20G 8GB 256-Bit GDDR5 PCI Express 3.0 CrossFireX Support,
Cooler Master Hyper 212 RGB Black Edition CPU Air Cooler, SF120R RGB Fan, 4 CD 2.0 Heatpipes, Anodized Gun-Metal Black, Brushed Nickel Fins, RGB Lighting for AMD Ryzen/Intel LGA1200/1151
ASUS - 27" IPS LCD FHD FreeSync Gaming Monitor (DisplayPort, DVI, HDMI) - Black
anyway, I installed the mobo, cpu & cooler, memory...everything fires up, all good....however, then I add the graphics card plug it in to the power supply, connect the monitor annnd NOTHING...to qualify this, I don't have a speaker in the new case (ordered 1 should be here today) so i can't hear any beep codes. No fans spin on the graphics card at all...it is in the 1st slot on the board closest to the cpu. Could the card be dead as it does nothing when connected to power. Any suggestions woudl be greatly appreciated as I must rma the card with newegg very soon to get a replacement.
thnx,
-Z
Last edited: