Radiator support for a Corsair 900D

Dean McKenzie

Reputable
Jun 16, 2015
11
0
4,520
2 Questions

1)Can I fit a 30mm x 240mm Rad (push) in the front of the 900D with at least one drive cage still installed at the front?

2) Can I fit a 56mm x 140mm Rad (push/pull) in the rear with a 64mm x 480mm Rad (push/pull)?

Thanks.
 
Solution
Are these the only places you can fit your rads? are they 2 seperate AIO coolers? If it's a custom loop, get a larger 360mm rad up the top, or a 420. If you went with 2 AIO's I'd put them both at the top at different points dependent on if you're using your CD bays. If you aren't then put them both at the top, of you are then put one at the top and one in the front.
Are these the only places you can fit your rads? are they 2 seperate AIO coolers? If it's a custom loop, get a larger 360mm rad up the top, or a 420. If you went with 2 AIO's I'd put them both at the top at different points dependent on if you're using your CD bays. If you aren't then put them both at the top, of you are then put one at the top and one in the front.
 
Solution


Thanks,
None of them are AIO, for the suggestion on the top rads. It's only the top optical bay I would loose using the 480mm Rad so that isn't an issue. The main concern is the front Rad and having to take out the HDD cages and the rear 140mm Rad. I've already sorted out the bottom compartment with another 480mm and a 240mm Rad.