Raid 0 driver Windows 10 install

[j.tasary1337]

Hello, I'm trying to setup my proliant DL360 G10 server with raid 0. I have setup the raid 0 and now I'm trying to install a fresh bought copy of Windows 10. When I get to the part where I choose disk to install Windows on (partition creation), I don't seem to see any. I tried getting the drivers from original intel rapid storage technology website, but none seems to work. I have "Hide incompatible" checked and thus none are showing. This is the official site i downloaded from: https://downloadcenter.intel.com/download/27400/Intel-Rapid-Storage-Technology-Intel-RST-User-Interface-and-Driver?product=55005 I tried f6flpy-64x.zip where it only showed drivers when I unchecked the hide option, still didn't work. Then I tried f6flpy-86x.zip, which didn't work at all. I don't know how to use the rest since it's an EXE file which doesn't show either and I can't open it on my laptop. Any ideas?

EDIT: Also, the exact name of the server is: HP Proliant DL360 G10 SFF Xeon 3106-B 1x16GB E208i-a 2 x 300GB SAS 10K DS HDD / 4x1GB NIC / 1x500W RPS / 1U / 3-3-3

 

[Lutfij]

You should be on Windows Server 2012 R2 and above:
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx#.Ws3Yly5uaUk

 

[j.tasary1337]

I think I have found the solution, I checked your link and read some of that and then I found a video where a guy downloaded exact driver for his type, so I did the same and surprisingly it works even on windows 10. Here is the link what I downloaded https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1010026813&swItemId=MTX_feeeea3c64e04e47a684c2961d&swEnvOid=4184