[SOLVED] RAID 5 will not complete rebuild. Drives seem fine.

[dskessler]

I have a Highpoint Rocketstor6124V Controller configured to RAID5. 4, Ironwolf NAS 8TB disks. Running Windows 10

The RAID worked fine for about a week and then out of nowhere, needed to rebuild. Highpoint's GUI is showing no disk errors. Rebuild stops after about 10 minutes.
"Disk 'ST8000VN004-2M2101-WKD1F1ZK' at Controller1-Channel1 failed."

Then the other drives fail and the controller unplugs.

I can reboot the RAID and the files come back online but only until the rebuild fails again.

here are all my log files
https://drive.google.com/drive/folders/1IC_zVYjtinRqt2XXUtlxxbly8BlWuMPy?usp=sharing

I submitted a ticket to Highpoint Support a week ago and they have been absolutely no help at all.

 

[popatim]

In your 5th image, click detail in the SMART column. That's the one that will check the health of the drives.

 

[mdd1963]

If you have usable/needed and accessible data on this RAID you need, get it off while you can...

 

[dskessler]

In your 5th image, click detail in the SMART column. That's the one that will check the health of the drives.

Thanks popatim,
All of the drives appear to be OK. I added that to my files. There are some slight differences between them but not much. https://drive.google.com/drive/folders/1IC_zVYjtinRqt2XXUtlxxbly8BlWuMPy?usp=sharing