RAID- Hard Drive problems error code 2000-142

[dmina]

Hello,

I have 1TB Raid 0 (2x 500GB hybrid solid state drives). I received an error code 2000-142, with Validation 4537 and my system has crashed.
1 Is there a process that can repair the hard drive?
2. Can I change setup (RAID) and run off one hard drive until I can replace the other one?

 

[pete123edgar]

If you are using raid 0, all your data are lost if one drives die. So if the other drive is dead, the answer is no you can't because raid 0 is setup as so.
Let me explain to you raid 0.
Raid 0 is when you have 2 or more storage drives and a particular program is split into two, therefore the work that is done for example copying files is split into the two raid 0 setup storage drives. So if 1 drive dies, the other drive only have half of the information of your files therefore it is missing 50% of the other dead files. So unless you can fix your drive, all your data is lost.

Finally my recommendation is usually have a backup drive to save all your most important files to prevent matters like this to happen or at least use raid 5.

 

[dmina]

Thanks for the reply and the advise.........