RAID question

[gary]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

I am new at working the any RAID systems so I my be just a dummy as these
things go but here goes my problem:

I have a GigaByte GA-8PE800 ULTRA motherboard with GigaRAID. I can't seem to
find a good set of files to install as I try to install along with Windows
XP. It either can't find something or my latest error message:

File \WIN2K_XP\iteraid.sys caused an unexpected error (4096) at line 2113 in
d:xpsprtm\base\boot\setup\oemdick.c.

With Gigabytes tech supports suggestion, I removed the jumper from my WD
hard drives and I final quit getting the error message as I booted that it
couldn't locate either channel. Now on boot up it does indicate the drives
are there, BUT they do not show in Windows.

Should the drives be formatted in another machine before installing as the
RAID array, or should they show up somewhere in Windows that I can access
them and then do the format??

As I look at the hardware in Windows, it shows my other hard drive where the
OS is located, and it also shows there is a disk array, but will not access
the array so I can even attempt a format.

Any help?

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

Are you trying to set up a RAID 0 or a RAID 1?

Gary wrote:
> I am new at working the any RAID systems so I my be just a dummy as these
> things go but here goes my problem:
>
> I have a GigaByte GA-8PE800 ULTRA motherboard with GigaRAID. I can't seem to
> find a good set of files to install as I try to install along with Windows
> XP. It either can't find something or my latest error message:
>
> File \WIN2K_XP\iteraid.sys caused an unexpected error (4096) at line 2113 in
> d:xpsprtm\base\boot\setup\oemdick.c.
>
> With Gigabytes tech supports suggestion, I removed the jumper from my WD
> hard drives and I final quit getting the error message as I booted that it
> couldn't locate either channel. Now on boot up it does indicate the drives
> are there, BUT they do not show in Windows.
>
> Should the drives be formatted in another machine before installing as the
> RAID array, or should they show up somewhere in Windows that I can access
> them and then do the format??
>
> As I look at the hardware in Windows, it shows my other hard drive where the
> OS is located, and it also shows there is a disk array, but will not access
> the array so I can even attempt a format.
>
> Any help?
>
>
>

 

[gary]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

I'm trying to setup a RAID 1......Trying to mirror the drives.

"Frank Berryman" <rumford@bellsouth.net> wrote in message
news:xW0Zd.16599$c72.13918@bignews3.bellsouth.net...
> Are you trying to set up a RAID 0 or a RAID 1?
>
> Gary wrote:
>> I am new at working the any RAID systems so I my be just a dummy as
these
>> things go but here goes my problem:
>>
>> I have a GigaByte GA-8PE800 ULTRA motherboard with GigaRAID. I can't
seem to
>> find a good set of files to install as I try to install along with
Windows
>> XP. It either can't find something or my latest error message:
>>
>> File \WIN2K_XP\iteraid.sys caused an unexpected error (4096) at line
2113 in
>> d:xpsprtm\base\boot\setup\oemdick.c.
>>
>> With Gigabytes tech supports suggestion, I removed the jumper from my
WD
>> hard drives and I final quit getting the error message as I booted that
it
>> couldn't locate either channel. Now on boot up it does indicate the
drives
>> are there, BUT they do not show in Windows.
>>
>> Should the drives be formatted in another machine before installing as
the
>> RAID array, or should they show up somewhere in Windows that I can
access
>> them and then do the format??
>>
>> As I look at the hardware in Windows, it shows my other hard drive
where the
>> OS is located, and it also shows there is a disk array, but will not
access
>> the array so I can even attempt a format.
>>
>> Any help?
>>
>>
>>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

"Frank Berryman" wrote:
> Are you trying to set up a RAID 0 or a RAID 1?
>
> Gary wrote:
> > I am new at working the any RAID systems so I my be just a
> dummy as these
> > things go but here goes my problem:
> >
> > I have a GigaByte GA-8PE800 ULTRA motherboard with GigaRAID.
> I can't seem to
> > find a good set of files to install as I try to install
> along with Windows
> > XP. It either can't find something or my latest error
> message:
> >
> > File WIN2K_XPiteraid.sys caused an unexpected error (4096)
> at line 2113 in
> > d:xpsprtmbasebootsetupoemdick.c.
> >
> > With Gigabytes tech supports suggestion, I removed the
> jumper from my WD
> > hard drives and I final quit getting the error message as I
> booted that it
> > couldn't locate either channel. Now on boot up it does
> indicate the drives
> > are there, BUT they do not show in Windows.
> >
> > Should the drives be formatted in another machine before
> installing as the
> > RAID array, or should they show up somewhere in Windows that
> I can access
> > them and then do the format??
> >
> > As I look at the hardware in Windows, it shows my other hard
> drive where the
> > OS is located, and it also shows there is a disk array, but
> will not access
> > the array so I can even attempt a format.
> >
> > Any help?
> >
> >
> >

Hi Guys
I also get the same error
i am trying to set up XP on a Raid 0 stripe on the 8knxp motherboard,
to no avail
the drivers keep failing.
any ideas?
Rob

--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/Soyo-RAID-ftopict50533.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=257105