Question Raijintek Themis Ram Clearance Height?

[boddole]

Hello, I was wondering if anyone would happen to know the actual ram clearance height of the Raijintek Themis, as the spec. page only seems to list the overall height...
Thank you for reading.

https://www.raijintek.com/en/products_detail.php?ProductID=3

 

[Barty1884]

Doesn't look like there is any specific RAM compatibility/clearance issues, at least not that I can see. Very much akin to a 212 EVO or something...

 

[boddole]

Doesn't look like there is any specific RAM compatibility/clearance issues, at least not that I can see. Very much akin to a 212 EVO or something...

Well, just doing some basic spec. drawings to pixel conversion I estimated ~32mm from base to fan bottom, with maybe another 4mm from the socket height - which won't be tall enough for the ~40mm ram sticks I have. That said, it may still fit horizontally as to not be a problem (have to check that), but a 'its got X mm clearance" would still be nice.

 

[Barty1884]

Might be a limitation for slot #1 closest to the CPU, but if you're using a 4 slot board & running 2 DIMMs, it's a non-issue.
Even if you are running 4 DIMMs (or 2 on a mITX board), it looks like you should be fine...

Only one DIMM slot looks to be partially blocked.

It might be angles, but to me, I don't think slot #1 is impeded to the point of being unusable.

https://www.techpowerup.com/reviews/Raijintek/Themis/5.html

 

[boddole]

Sorry for the delay in reply, got busy with life...now I'm back on this project and I appreciate your notes.