ram campatibility with GIGABYTE 970A-UD3P

Nov 8, 2018
1
0
10
0
Hi. I have a GIGABYTE 970A-UD3P motherboard ı have 2 Kingston 4GB Hyperx Savage RED DDR3 1600MHz CL9 PC Ram rams which are working fine. I bought a Kingston HyperX Genesis 4GB 1600MHz DDR3 Ram (KHX1600C9D3/4G) today to add to my system but when I install the ram system did not booted first. Then I removed all the existing rams from their slots and putted the only new one and when ı booted there was a bluısh screen saying " no bootable device is detected. System will enter Bıos Setup Utility."
Is thıs ram compatibil with my motherboard or not? What should I do?
 

Lutfij

Titan
Moderator
You might want to reseat the 8GB Kingston Savage kit back into their original slots, then set the primary boot device to either your SSD or Windows Boot Manager. Then when in GUI, see if you're on the latest BIOS update. After all is verified, I'd ask you to source another Kingston Savage Kit and drop it into the other two slots so you have 16GB's of cumulative ram.

And, no, I'm not a fan of mixing and matching rams.
 

ASK THE COMMUNITY