Question RAM D.O.C.P/XMP Overclock question

[anzetek1]

So i've got corsair vengeance rgb ram which is clocked at 2133mhz at default but it's rated for 3200mhz, so i applied the D.O.C.P profile so it would run at its rated speed. However i noticed rainbow six siege and gta5 started to crash quite often so i guessed its the OC profile, then i increased the dram voltage from 1.350v to 1.360v yet the problem is still there. So i set the clocks according to the Ryzen DRAM calculator program and the games still like to crash.

Pictures:
-> http://prntscr.com/p7wfdb (BIOS#1)
-> http://prntscr.com/p7wfhr (BIOS#2)

-> http://prntscr.com/p7wfmp (Timings#1)
-> http://prntscr.com/p7wfsi (Timings#2)
-> http://prntscr.com/p7wfw6 (Timings#3)
-> http://prntscr.com/p7wg08 (Timings#4)
-> http://prntscr.com/p7wg4e (Timings#5)

-> http://prntscr.com/p7wg8k (Ryzen DRAM Calc)

So i was wondering what's making it crash and what i should change so it doesn't. The timings on the D.O.C.P profile were different than i set in the "Timings1" picture that i posted cuz i thought changing that to what Ryzen DRAM Calc recommends would fix the issue, however it didnt.

Specs:
Ryzen 7 2700x
Asus Strix RTX 2070
Asus Crosshair VII Hero
Corsair Vengeance RGB 4x8 rated for 3200mhz
Corsair HX750i


Thanks for all the answers and help in advance!

 

[Eximo]

If I recall, they don't recommend running 4 DIMMs with speeds like 3200Mhz. Try running it at 2933Mhz and see if it does any better when it comes to crashing.

Probably not what you wanted to hear, but I think this applies to all of the generations (but the maximum goes up with each)

Look up specifically Ryzen with 4 Dimms and see what is out there. I've seen some advice out there, but you have the opportunity to put it to practice.