Ram don't go above 2133mhz on B350-Plus

[luizmartini]

I have recorded one video

Watch the video here

If i set my new memory what i bought to other frequency its shows this problem above on the video, won't start, only after 3 restarts on computer its starts but in default 2133mhz.

Here is the model of the ram: CMW16GX4M2C3000

I already activated D.O.C.P but nothing works.

Please help!!

 

[MeanMachine41]

Hi luizmartini

Your system at bootup, switching off and on is Post attempting to train your RAM for the most stable config however not at it's best frequency. Bios very often defaults to 2133MHz or 2400MHz

As 3000MHz is OC RAM then profiles will not work as OC RAM is not the JDEC standard.
You will have to Manually enter your RAMs frequency (In Bios) and possibly adjust Primary timings and Voltage to get them to work at 3000MHz.
Unfortunately your DIMMs are not on the MB QVL so have not been tested. As so many RAM kits are released each month it may be the QVL has not been updated, They should work with Bios tweaking.

Before manually configuring RAM, Update your Bios to version 4023
Go here:https://www.asus.com/au/Motherboards/PRIME-B350-PLUS/HelpDesk_Download/

 

[luizmartini]

My bios is already updated, btw here is the Thaiphoon Burner results:

https://prnt.sc/ls8bws

If this helps you to understand my memory... thanks

Hi luizmartini

Your system at bootup, switching off and on is Post attempting to train your RAM for the most stable config however not at it's best frequency. Bios very often defaults to 2133MHz or 2400MHz

As 3000MHz is OC RAM then profiles will not work as OC RAM is not the JDEC standard.
You will have to Manually enter your RAMs frequency (In Bios) and possibly adjust Primary timings and Voltage to get them to work at 3000MHz.
Unfortunately your DIMMs are not on the MB QVL so have not been tested. As so many RAM kits are released each month it may be the QVL has not been updated, They should work with Bios tweaking.

Before manually configuring RAM, Update your Bios to version 4023
Go here:https://www.asus.com/au/Motherboards/PRIME-B350-PLUS/HelpDesk_Download/

 

[MeanMachine41]

Go into your Bios and try Primary Timings at 15-17-17-35 and adjust Dram Voltage to 1.35 Volts.
You can go up to 1.4V but I don't advise more than 1.4V.

 

[luizmartini]

Still not working friend, same problem with looping, tried several voltages like 1.35~1.39 and nothing.

Omg, i dont know what is this problem, i saw one guy which runned this ram with same board commented on amazon and got 3000mhz without problems

Go into your Bios and try Primary Timings at 15-17-17-35 and adjust Dram Voltage to 1.35 Volts.
You can go up to 1.4V but I don't advise more than 1.4V.