Question RAM frequency issues after updating BIOS

[Alcaparra]

My PC:

-Motherboard: Asus prime x570 p
-CPU Ryzen 3600x
-RAM Corsair Vengeance LPX CMK16GX4M2D3600C18 2 x 8 GB, 3600 MHz
Windows 10 home

I could set my RAM at 3600mhz with the bios that brought the Motherboard, but after updating the bios to version 1405 if I set them at 3600mhz the BIOS crash. I have tried version 1404 and i have the same problem.

Any solution? Thanks!

 

[Third-Eye]

My PC:

-Motherboard: Asus prime x570 p
-CPU Ryzen 3600x
-RAM Corsair Vengeance LPX CMK16GX4M2D3600C18 2 x 8 GB, 3600 MHz
Windows 10 home

I could set my RAM at 3600mhz with the bios that brought the Motherboard, but after updating the bios to version 1405 if I set them at 3600mhz the BIOS crash. I have tried version 1404 and i have the same problem.

Any solution? Thanks!

Are you only setting 3600Mhz or have you also set the timings and voltage? What voltage does the motherboard have for DRAM with the ram set to 3600Mhz? Make sure you have the modules installed to the Gray slots and not one gray and one black.

 

[Alcaparra]

Are you only setting 3600Mhz or have you also set the timings and voltage? What voltage does the motherboard have for DRAM with the ram set to 3600Mhz? Make sure you have the modules installed to the Gray slots and not one gray and one black.

I have only changed the frequency, in the same way that I made in the first version of the BIOS.
The modules are installed in the slot of the same color.

 

[Third-Eye]

I have only changed the frequency, in the same way that I made in the first version of the BIOS.
The modules are installed in the slot of the same color.

I'm not really sure where the DRAM voltage setting is but it may be in the AI Tweaker under DRAM Timings. You may have to switch to Advanced mode with the F7 key in the BIOS to actually change the ram voltage. After you make sure the voltage for DRAM is set to 1.35, try booting to Windows. 1.35 volts is the advertised voltage for your modules at 3600Mhz.