Ram frequency problem.

[Adrian Potocki]

Hi guys i've bought 4x4gb DDR3 1600MHz ram from kingston (fury x).

My mobo supports a maximum of 16 GB of RAM DDR3 at 1333 MHz (i've already tried to set the frequency in setup mode but there's not a section dedicated to configurate/modify RAM frequency or voltage)

The problem is that my pc doesn't run RAM at the highest frequency possible but at 600 MHz...

Here is the screen of my system: http://postimg.org/image/4csgpvfmd/

 

[Xemko]

There is no problem, it works as it should be.
Here is the answer to your question : http://www.tomshardware.com/forum/309549-30-adata-1333mhz-ddr3-running-667mhz .

This is due to DDR (Dual Data Rate). In simplest of explanations, the modules are running at a raw 667MHz, but due to DDR techniques, you are getting a data rate of 1333MHz.