[SOLVED] RAM issue

LeVzi

Honorable
Nov 3, 2017
136
4
10,585
Hi everyone, i've been running Corsair Vengeance Pro Series Red RAM , 16gb (2x8gb) at 1600Mhz for a while, and i've decided to up that to 32gb by adding 2 more sticks of the exact same RAM.

The problem is that the system wouldn't boot at all with the 4 sticks in, I had to remove one then it booted. A quick check showed that the XMP profiles wouldn't work with the RAM, so I disabled it, the system now boots
but the RAM is running at 1333mhz.

So is there a way I can get all four sticks running at 1600mhz like its supposed to ? I've done some searching, and there are suggested changes to timing and voltages, but i'm not experienced with this with RAM. I only, in the last few months, OC'd my CPU to 4.4 (AMD FX 8350)

I realise it's an older system but the parts are quite new, and I'd like to maximize it for work for as long as I can. So any help is greatfully received.