Question RAM only showing 2400mHZ

[Zderac Picaka]

Hello,
I am having BIOSTAR B450MH with Ryzen 7 2700x processor and i bought KINGSTON Fury Beast 16GB (2x8GB kit) with 3200mHZ. I installed it and it works perfect, but when i go to Task Manager it says it only works for 2400mHZ and in CPU-Z it says uncore frequency is 1197.1, how can i fix this ?

 

[rgd1101]

turn on xmp/docp memory profile in bios

 

[SkyNetRising]

when i go to Task Manager it says it only works for 2400mHZ and in CPU-Z it says uncore frequency is 1197.1, how can i fix this ?

Show screenshots from CPU-Z - memory and spd sections.
(upload to imgur.com and post link)

Uncore frequency is not, what you have to look at.
See DRAM frequency instead. That shows your DRAM speed (actual frequency). You multiply it by x2 and get effective frequency.

 

[Zderac Picaka]

turn on xmp/docp memory profile in bios

In which section is that?

 

[Zderac Picaka]

Show screenshots from CPU-Z - memory and spd sections.
(upload to imgur.com and post link)

Uncore frequency is not, what you have to look at.
See DRAM frequency instead. That shows your DRAM speed (actual frequency). You multiply it by x2 and get effective frequency.

https://imgur.com/a/d0PZmrZ

View: https://imgur.com/a/d0PZmrZ


Here

 

[Zderac Picaka]

Show screenshots from CPU-Z - memory and spd sections.
(upload to imgur.com and post link)

Uncore frequency is not, what you have to look at.
See DRAM frequency instead. That shows your DRAM speed (actual frequency). You multiply it by x2 and get effective frequency.

https://imgur.com/a/bEnfOk1

View: https://imgur.com/a/bEnfOk1


here is SPD pictures (both pictures are in the link)

 

[SkyNetRising]

turn on xmp/docp memory profile in bios

In which section is that?

BIOS of your board doesn't seem to support A-XMP/DOCP.
You have to overclock ram manually.

BIOS/O.N.E menu
Memory clock - manual
Memory Frequency - set to appropriate value (DDR4 3200)
DDR Memory Voltage 1.35V

Note - DDR4 3200 mode might not be available or may not work, then try lower speed modes.