Hello, my computer is very slow and my ram is never even reaching 40% of it's capacity. I took the CPU-Z tool to see my cpu's infos and that's what i got :
DRAM = 266 mhz
fsm = 1:2
4clocks,4clocks,4clocks
12 clocks
*** i got a 3072mb(3gb) ram intel pentium t2390 (dual-core)1.86ghz.
core speed = between 1860-70 mhz
multiplier = 14X
bus speed = 133 mhz
rated fsb = 532 mhz
If I take some advices i found on this site, clocks should be doubled and the dram frequency too.so that would give me DRAM = 533mhz (x2 = 1066mhz)and clocks should be 8-8-8 24.
I just wanted to know is this is right and how to change these settings. Must I have to go in the bios at startup and if yes how.
here are screenshots in case you'd need some more info
http://flic.kr/p/abaGTR
http://flic.kr/p/abaGVn
DRAM = 266 mhz
fsm = 1:2
4clocks,4clocks,4clocks
12 clocks
*** i got a 3072mb(3gb) ram intel pentium t2390 (dual-core)1.86ghz.
core speed = between 1860-70 mhz
multiplier = 14X
bus speed = 133 mhz
rated fsb = 532 mhz
If I take some advices i found on this site, clocks should be doubled and the dram frequency too.so that would give me DRAM = 533mhz (x2 = 1066mhz)and clocks should be 8-8-8 24.
I just wanted to know is this is right and how to change these settings. Must I have to go in the bios at startup and if yes how.
here are screenshots in case you'd need some more info
http://flic.kr/p/abaGTR
http://flic.kr/p/abaGVn