Question Ram speed

[renowebb]

Ryzen 5600x Gigabyte B550m PRO-P motherboard installed 3600 ram show up as 2133 on CPU-Z . Went into Bios changed to 3600 went black screen , reflash bios booted backup and have win10 came up still showing 2133 . The ram i used is on Gigabytes QVL Ram used F4-3600C16D-16GVK G.SKILL Ripjaws. What am i doing wrong

 

[JohnBonhamsGhost]

changed to 3600 went black screen

when setting to 3600MHz did you also set the voltage to manufacturer rated spec?

is there no preset AMP/XMP profile available to use?

 

[renowebb]

I found the XMP profile and changed it like you wrote . BIOS shows The correct speed & lat. but win i cheak CPU-Z it shows in the time tables that JEDEC # 5 6 7 as 1066 and #8 as 1801 also the voltages are different 1.20 for the first 3 and 1.350 for the last which is correct. Am new at this so any help will be great . Also how are you and Jimmy getting along ?
Thank You

 

[JohnBonhamsGhost]

win i chek CPU-Z it shows in the time tables that JEDEC # 5 6 7 as 1066 and #8 as 1801 also the voltages are different 1.20 for the first 3 and 1.350 for the last which is correct.

as it should.

 

[renowebb]

Cool Thank You

 

[JohnBonhamsGhost]

Also how are you and Jimmy getting along ?

still waiting for him to show up...

 

[gskill support]

I found the XMP profile and changed it like you wrote . BIOS shows The correct speed & lat. but win i cheak CPU-Z it shows in the time tables that JEDEC # 5 6 7 as 1066 and #8 as 1801 also the voltages are different 1.20 for the first 3 and 1.350 for the last which is correct. Am new at this so any help will be great . Also how are you and Jimmy getting along ?
Thank You

Can you provide a screen shot of 'Memory' tab or provide the DRAM information from there?

These values are live operating.

 

[renowebb]

Can you provide a screen shot of 'Memory' tab or provide the DRAM information from there?

These values are live operating.

Am afraid i don't know how do that.

 

[gskill support]

Am afraid i don't know how do that.

What do you see for DRAM Frequency and timings below that in the Memory tab?

 

[renowebb]

What do you see for DRAM Frequency and timings below that in the Memory tab?

Fr
Frec 1796.4 timing (lat) 16

 

[gskill support]

Sounds like the system is performing as it should with XMP Profile enabled.

 

[renowebb]

Yes, i agree thank you for your time.