Question RAM Speeds Not Sticking?

Jan 10, 2020
1
0
10
0
I recently purchased a 3800x to replace my 2600x. I updated my BIOS (3003 for ROG Strix B450-f) to make sure it would be compatible etc. Now whenever I enable DOCP in BIOS it says its going from 2133mhz to 3000mhz. It then boot loops a few times as if it was memory training then when it boots up into windows its still running at 2133mhz despite it still saying 3000mhz.
Anyone aware of any solutions?
Thanks in advanced
 

zx128k

Prominent
Nov 23, 2019
616
105
590
8
Memory failed to train. You get a number of reboots and then BIOS will use safe values to boot. Try entering the frequency yourself, along with the values for the primary timings and change the DRAM voltage to what the RAM states you need. Hopefully the motherboard will then boot. I would manually set your IF as well.
 
I suggest listing a memory part number and/or link to it. Otherwise, people are just guessing or assuming you have some kind of compatible memory.

ASUS strongly recommends installing AMD chipset driver 18.50.16 or later before updating BIOS.
 

ASK THE COMMUNITY