Ram upgrade and now windows will not boot

[AviyiM]

I'll try to give as much info as possible.

New to the forum and just registered. I have a Samsung R540 not sure of the actual model because it only says "R540" on the bottom. I believe it is a R540 JA03 because of the specs resembling that of the laptop.

- It is running Windows 7 Home Premium 64-Bit (so I know 8GB can be installed).

- The laptop can handle 8gb RAM but every time I place it in I get an error message. Then when I go back to the original RAM and it boots up, no problems.

Laptop: SAMSUNG R540 JA03 [Unsure]:
http://www.eclipsecomputers.com/product.aspx?code=NBS-R540JA03

RAM Used: [DUAL CHANNEL]
ADATA AD3s1333w4g9-b (2x4GB DDR3 1333MHz)

http://www.pasocomclub.co.jp/img/4997401152727.jpg

Problem:
Upgraded RAM with ADATA 2x4 8GB Kit [1333MHz]

Windows 7 Home Premium 64-Bit! - WILL NOT BOOT!!

I get this error message every time, I try to boot with the new RAM installed:

http://cdn9.howtogeek.com/wp-content/uploads/2009/12/640x315xsshot20091217020232.png.pagespeed.ic.FbPMw1QzvX.png[/

ALSO! THE BIOS PICKS UP AND SEES THAT THE RAM IS THERE [8192MB SLOT 1: 4096MB SLOT 2: 4096MB]

Things I've Already Tried:
- Update BIOS (Newest Version)
- Reinstall Windows 7 Home Premium 64-Bit

Possible solutions?:
- Underclock RAM?, I believe that the current RAM is 2x2GB DDR3 [1066MHz]

 

[popatim]

Whats happens if you chose to start windows normally?

 

[scout_03]

you have these 4 gig kit then i would try to boot with one of them and let system detect it then put in the other http://www.adata.com/en/dram/gallery/63#3

 

[AviyiM]

Whats happens if you chose to start windows normally?

it begins to loop over and over again, from my samsung bios menu back to the options where it makes me pick the 2 again. It will not get past, i've tried that as well as safe mode and other advanced function but nothing

 

[AviyiM]

you have these 4 gig kit then i would try to boot with one of them and let system detect it then put in the other http://www.adata.com/en/dram/gallery/63#3

the bios detects the RAM but when i boot windows with 1 stick in, i get a blue screen, with 2 sticks i get that black screen

 

[scout_03]

could you try one stick of ram in the laptop second slot only and boot .