Question Random BSODs For Various Reasons

Oct 14, 2020
1
0
10
0
I recently bought a new computer and moved my M.2 SSD over to it from my previous computer. Ever since I started using it, I have been experiencing random BSODs, as well as a few lockups and one time when my computer just flat out rebooted. It is hard for me to pinpoint what is wrong, since the error is different each time. Most of them have been related to page faults and system service exceptions, with a couple of hardware failures. I have run Memtest86, Memory Diagnostics Tool, and Intel's processor diagnostics tool, and all turned up clean. I can usually run performance tests without a hitch. I have also tried reinstalling Windows 10 twice, running DISM, and running CHKDSK.

Could someone help me figure out what could be the problem? I am starting to think that the culprit is the power supply, since the manufacturer, CyberpowerPC, is a bit infamous for cheapening out on PSUs. Will probably never buy from them again and just make my own computer next time.

Here are the mini dumps from the past few days.

https://drive.google.com/drive/folders/1sE8vppp4jkpw1G9u16VWV3cLRNDe5Ku0?usp=sharing

My specs (from the invoice):

CU-217-255 OEM INTEL CORE PROCESSOR I9-10900K 10/20 3.70GHZ 20MB
CACHE LGA1200 (COMET LAKE-S) 125W
HD-204-610 1TB WD BLUE SN550 SERIES PCIE NVME M.2 SSD (was replaced with Samsung EVO PLUS 970 SSD)
HD-403-159 3TB HDD 3.5" SATAIII 5400RPM 6.0 GB/s 64MB CACHE
RM-602-114 ADATA 8GB DDR4-3000 XPG Z1 MEMORY
FA-104-174 APEVIA DUAL ADDRESSABLE DIGITAL RGB 120MM FAN 3PINS
FA-WATER-104 ASETEK 550LC 120MM WATERCOOLER
FA-104-116 CASE FAN 120 MM
FA-RING-101 INTEL 1150 RETENTION RING (ASETEK)
CS-192-401 SYBER 802 CUBE BLACK CASE
MB-480-101 ASUS PRIME Z490-V ATX ARGB 1GBE LAN 2 PCIE X16 4 PCIE X1 2X M.2
NC-109-217 INTEL WI-FI 6 AX201 2X2 2.4GHZ, 5GHZ + BT5 M.2 CNVI C ARD (ASUS PRIME Z490)
VC-270-201 NVIDIA GEFORCE RTX 3080 10GB GDDR6X
MISC ONBOARD 7.1 SOUND
PS-138-103 ATNG 1000 WATT 80 PLUS GOLD POWER SUPPLY

Any help would be appreciated! I have been trying to figure out my problem for the past week.
 
Last edited:

ASK THE COMMUNITY