Random Shutdowns, no warning or BSOD just turns off.

Connor Cockroft

Reputable
Feb 25, 2015
3
0
4,510
Hello, my PC which i just built has been randomly shutting down. It does this when the PC is streaming video, playing games or when its downloading alot. I just built it and havent even been able to use it very often due to this crippling problem. I am Getting the Kernal 41 task 63 error as well

My build is as follows:
AMD FX-8370
Club3d Raedon R9 290
Corsair 750 watt PSU
12 gb G-Skill Ripjaws RAM
ASRock 980de3/u3s3 MOBO
Cooler master EVO 212 CPU cooler
Seagate 2tb HDD
and a standard CDROM reader and writer by LG.
Windows 8.1 64bit

If anyone has any ideas what would be causing this issue please get back to me as soon as possible, thank you
 
Use a program like speed fan or core temp to see temps and run a game, benchmark, stress test ect. . UEFI screen does tell you the temps too but it does not put a load on your computer.
 


would to much thermal paste be causing crashes maybe? my heat for cpu when idle is usually around 30c to 45c under minor stress, i think i applied to much thermal paste
 
hunt down nirsoft bsod tool your questions will be answered more direct...i had the same it turned out the driver file was corrupt after nice windows update change my sata drivers as running raid ssd,s ..give it a whirl
 
paste, use artic silver 5. 2000 grit lapp the surfaces flat as poss even. 500 microns of paste ie less thickness than a credit card thinner is better its only filling the imperfections in the metal......3.4 i5 2550k clocked at 5.8/ 2133mhz ram/samsung evo 2 ram 8gigs, Gainward gtx 970 gs all water cooled run prime and furr mark at the same time :)~ slow fan speed at slowest i can run them papst fans may i add ....max of 55-60 degrees after an hour..on cpu and my gpu.....lapping and heat sinks are the worst thing made on boards due to the CNC machining methods in mass production.....this does help without question