Rate my build/ first time building tips

[Redbird52]

is this build good?

AMD fx-6300

Cooler Master Hyper TX3 54.8 CFM Sleeve Bearing CPU Cooler

ASRock 970 Extreme3 R2.0 ATX AM3+ Motherboard

A-Data XPG V2 16GB (2 x 8GB) DDR3-1600 Memory

Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive

MSI Radeon R9 270 2GB Video Card

Apevia X-SNIPER2-BL ATX Mid Tower Case

BitFenix Spectre 47.4 CFM 200mm Fan

Cooler Master Blade Master 40.8 CFM 80mm Fan

3x Rosewill RFA-120-BL 74.5 CFM 120mm Fan

LEPA MaxBron 450W 80+ Bronze Certified Semi-Modular ATX Power Supply

Windows 8.1 64 bit

 

[Quaddro]

AMD fx-6300 => good cpu

Cooler Master Hyper TX3 54.8 CFM Sleeve Bearing CPU Cooler => if you want to overclock your cpu, get a better cooler, for example : coolermaster hyper 212 evo..but if you only want to run it at stock clock, you'll be fine with tx3

ASRock 970 Extreme3 R2.0 ATX AM3+ Motherboard => well, decent..not the best, but still decent..

A-Data XPG V2 16GB (2 x 8GB) DDR3-1600 Memory => get a faster memory, at least 1866Mhz. Your system and mobo support it..

Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive => Okay

MSI Radeon R9 270 2GB Video Card => good graphic cards..

Apevia X-SNIPER2-BL ATX Mid Tower Case => no comment..😀

BitFenix Spectre 47.4 CFM 200mm Fan => okay

Cooler Master Blade Master 40.8 CFM 80mm Fan => okay

3x Rosewill RFA-120-BL 74.5 CFM 120mm Fan => okay

LEPA MaxBron 450W 80+ Bronze Certified Semi-Modular ATX Power Supply => decent power supply..

Windows 8.1 64 bit => okay..

 

[Redbird52]

so how about this: G.Skill Ripjaws Z Series 16GB (4 x 4GB) DDR3-1866 Memory

 

[Quaddro]

nice..that'll fit on your system flawlessly..

 

[Redbird52]

thank you very much