RDC through linksys router

[Chris]

Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)

<<Message:

The client could not connect to the remote computer.
Remote connections might not be enabled or the computer might be too
busy to accept new connections. It is also possible that network
problems are preventing your connection.
Please try connecting again later. >>


When i try to remotely access a client's computer, this is the error
message i get. However, when i access the clients server, and through
the server, access his computer, i am able to do so immediately.

Is there any way to set up a specific port on the router, and also on
the clients computer, so i can actually get it to work from outside of
the lan. I know that the default port for remote access is 3389, so can
i add a port, or is there a procedure i can follow to get it working.

I have the port forwarding set up on the router, and assigned a port to
the client computer (among others) and all computers work except this
one. I did find remote access software that didnt belong, computer has
been checked for outside programs, and registry has been revised,
everything seems to look up to par to all the other computers.

Any ideas would be greatly appreciated.

Chris

 

[Guest]

Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)

Chris wrote:
> <<Message:
>
> The client could not connect to the remote computer.
> Remote connections might not be enabled or the computer might be too
> busy to accept new connections. It is also possible that network
> problems are preventing your connection.
> Please try connecting again later. >>
>
>
> When i try to remotely access a client's computer, this is the error
> message i get. However, when i access the clients server, and through
> the server, access his computer, i am able to do so immediately.
>
> Is there any way to set up a specific port on the router, and also on
> the clients computer, so i can actually get it to work from outside of
> the lan. I know that the default port for remote access is 3389, so
> can i add a port, or is there a procedure i can follow to get it
> working.
>
> I have the port forwarding set up on the router, and assigned a port
> to the client computer (among others) and all computers work except
> this one. I did find remote access software that didnt belong,
> computer has been checked for outside programs, and registry has been
> revised, everything seems to look up to par to all the other
> computers.
>
> Any ideas would be greatly appreciated.
>
> Chris

You can open up port 3389 to whatever you want in your router/firewall, but
if you don't have multiple public IP addresses, it's a pain in the ___.
You'd also need DHCP reservations or static IPs on the clients.
See if http://members.cox.net/ajarvi/RemoteDesktop/Multiple_PC_RD.html helps
at all?

 

[Guest]

Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)

Lanwench...

That link has changed to...

http://theillustratednetwork.mvps.org/RemoteDesktop/Multiple_PC_RD.html

Later...

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...

"Lanwench [MVP - Exchange]" <lanwench@heybuddy.donotsendme.unsolicitedmail.atyahoo.com> wrote in
message news:u3p7QxH3EHA.3708@TK2MSFTNGP14.phx.gbl...
> Chris wrote:
>> <<Message:
>>
>> The client could not connect to the remote computer.
>> Remote connections might not be enabled or the computer might be too
>> busy to accept new connections. It is also possible that network
>> problems are preventing your connection.
>> Please try connecting again later. >>
>>
>>
>> When i try to remotely access a client's computer, this is the error
>> message i get. However, when i access the clients server, and through
>> the server, access his computer, i am able to do so immediately.
>>
>> Is there any way to set up a specific port on the router, and also on
>> the clients computer, so i can actually get it to work from outside of
>> the lan. I know that the default port for remote access is 3389, so
>> can i add a port, or is there a procedure i can follow to get it
>> working.
>>
>> I have the port forwarding set up on the router, and assigned a port
>> to the client computer (among others) and all computers work except
>> this one. I did find remote access software that didnt belong,
>> computer has been checked for outside programs, and registry has been
>> revised, everything seems to look up to par to all the other
>> computers.
>>
>> Any ideas would be greatly appreciated.
>>
>> Chris
>
> You can open up port 3389 to whatever you want in your router/firewall, but
> if you don't have multiple public IP addresses, it's a pain in the ___.
> You'd also need DHCP reservations or static IPs on the clients.
> See if http://members.cox.net/ajarvi/RemoteDesktop/Multiple_PC_RD.html helps
> at all?
>
>

 

[Chris]

Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)

Lanwench [MVP - Exchange] wrote:
> Chris wrote:
>
>><<Message:
>>
>>The client could not connect to the remote computer.
>>Remote connections might not be enabled or the computer might be too
>>busy to accept new connections. It is also possible that network
>>problems are preventing your connection.
>>Please try connecting again later. >>
>>
>>
>>When i try to remotely access a client's computer, this is the error
>>message i get. However, when i access the clients server, and through
>>the server, access his computer, i am able to do so immediately.
>>
>>Is there any way to set up a specific port on the router, and also on
>>the clients computer, so i can actually get it to work from outside of
>>the lan. I know that the default port for remote access is 3389, so
>>can i add a port, or is there a procedure i can follow to get it
>>working.
>>
>>I have the port forwarding set up on the router, and assigned a port
>>to the client computer (among others) and all computers work except
>>this one. I did find remote access software that didnt belong,
>>computer has been checked for outside programs, and registry has been
>>revised, everything seems to look up to par to all the other
>>computers.
>>
>>Any ideas would be greatly appreciated.
>>
>>Chris
>
>
> You can open up port 3389 to whatever you want in your router/firewall, but
> if you don't have multiple public IP addresses, it's a pain in the ___.
> You'd also need DHCP reservations or static IPs on the clients.
> See if http://members.cox.net/ajarvi/RemoteDesktop/Multiple_PC_RD.html helps
> at all?
>
>
Actually, on the router, port forwarding is enabled and port 3389 is
already assigned to the server. There are other port #'s also, which are
assigned to other computers. The port i have assigned for this
particular computer, doesnt work, while all the others do. The computer
itself has a static ip outside of the dhcp range. I thought i would add
a port on the firewall of the computer itself and assign it the number
on the router port fwd, but that too doesnt seem to work. any other
ideas?

 

[Guest]

Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)

This page has the links to the KB articles that detail how to change the Listening port on a
particular PC and how to address that PC. You would need to forward the new Listening port...

http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...

"Chris" <ludwigvonb007@hotmail.com> wrote in message
news:Jhltd.117477$IQ.107146@bignews6.bellsouth.net...
> Lanwench [MVP - Exchange] wrote:
>> Chris wrote:
>>
>>><<Message:
>>>
>>>The client could not connect to the remote computer.
>>>Remote connections might not be enabled or the computer might be too
>>>busy to accept new connections. It is also possible that network
>>>problems are preventing your connection.
>>>Please try connecting again later. >>
>>>
>>>
>>>When i try to remotely access a client's computer, this is the error
>>>message i get. However, when i access the clients server, and through
>>>the server, access his computer, i am able to do so immediately.
>>>
>>>Is there any way to set up a specific port on the router, and also on
>>>the clients computer, so i can actually get it to work from outside of
>>>the lan. I know that the default port for remote access is 3389, so
>>>can i add a port, or is there a procedure i can follow to get it
>>>working.
>>>
>>>I have the port forwarding set up on the router, and assigned a port
>>>to the client computer (among others) and all computers work except
>>>this one. I did find remote access software that didnt belong,
>>>computer has been checked for outside programs, and registry has been
>>>revised, everything seems to look up to par to all the other
>>>computers.
>>>
>>>Any ideas would be greatly appreciated.
>>>
>>>Chris
>>
>>
>> You can open up port 3389 to whatever you want in your router/firewall, but
>> if you don't have multiple public IP addresses, it's a pain in the ___.
>> You'd also need DHCP reservations or static IPs on the clients.
>> See if http://members.cox.net/ajarvi/RemoteDesktop/Multiple_PC_RD.html helps
>> at all?
>>
>>
> Actually, on the router, port forwarding is enabled and port 3389 is already assigned to the
> server. There are other port #'s also, which are assigned to other computers. The port i have
> assigned for this particular computer, doesnt work, while all the others do. The computer itself
> has a static ip outside of the dhcp range. I thought i would add a port on the firewall of the
> computer itself and assign it the number on the router port fwd, but that too doesnt seem to work.
> any other ideas?

 

[Guest]

Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)

Sooner Al wrote:
> Lanwench...
>
> That link has changed to...
>
> http://theillustratednetwork.mvps.org/RemoteDesktop/Multiple_PC_RD.html
>
> Later...

Thanks! I've updated.
>
>
> "Lanwench [MVP - Exchange]"
> <lanwench@heybuddy.donotsendme.unsolicitedmail.atyahoo.com> wrote in
> message news:u3p7QxH3EHA.3708@TK2MSFTNGP14.phx.gbl...
>> Chris wrote:
>>> <<Message:
>>>
>>> The client could not connect to the remote computer.
>>> Remote connections might not be enabled or the computer might be too
>>> busy to accept new connections. It is also possible that network
>>> problems are preventing your connection.
>>> Please try connecting again later. >>
>>>
>>>
>>> When i try to remotely access a client's computer, this is the error
>>> message i get. However, when i access the clients server, and
>>> through the server, access his computer, i am able to do so
>>> immediately.
>>>
>>> Is there any way to set up a specific port on the router, and also
>>> on the clients computer, so i can actually get it to work from
>>> outside of the lan. I know that the default port for remote access
>>> is 3389, so can i add a port, or is there a procedure i can follow
>>> to get it working.
>>>
>>> I have the port forwarding set up on the router, and assigned a port
>>> to the client computer (among others) and all computers work except
>>> this one. I did find remote access software that didnt belong,
>>> computer has been checked for outside programs, and registry has
>>> been revised, everything seems to look up to par to all the other
>>> computers.
>>>
>>> Any ideas would be greatly appreciated.
>>>
>>> Chris
>>
>> You can open up port 3389 to whatever you want in your
>> router/firewall, but if you don't have multiple public IP addresses,
>> it's a pain in the ___. You'd also need DHCP reservations or static
>> IPs on the clients.
>> See if
>> http://members.cox.net/ajarvi/RemoteDesktop/Multiple_PC_RD.html
>> helps at all?