I have a card reader with a 9-pin USB header, which fits a USB connector on my GA-H81M-DS2 motherboard, which uses H81 chipset. The reader was removed from and had been worked fine with Lenovo Edge 71, which used H61 chipset . However, it does not work with GA-H81M-DS2, whose boot menu shows no SD card, which will be shown if it is in a reader with a USB-A connector.
The problematic reader uses REALTEK RTS5186. Is it possible for H81 chipset not to support RTS5186?
The 9-pin USB connector on GA-H81M-DS2 works with my USB HDD and flash drives, so the problem does not lie in the connector.
The problematic reader uses REALTEK RTS5186. Is it possible for H81 chipset not to support RTS5186?
The 9-pin USB connector on GA-H81M-DS2 works with my USB HDD and flash drives, so the problem does not lie in the connector.
Last edited: