I built my PC this Saturday evening and it worked fine. I had everything installed already, such as windows and drivers etc. On Sunday I decided to sort out the wires as I left it a mess. I plugged it in and it was still working fine, the GPU stopped working twice but the problem was sorted after removing and plugging in the wires on both end.
Then I had a sudden realisation I may have left an extra standoff in the case. So I removed the GPU, took out all the cables and lifted it just enough to see the standoffs and could only count the amount needed. Although I don’t reminder taking the extra one off!
After I put all the cables back in, it now won’t turn on. There’s no life what so ever to the PC and I can’t figure out how. I’ve checked the 8 pin and 24 pin connector, checked the front panel connectors are right. I’m now worried I might have fried my mother board (did this with my partner, maybe one of us forgot to ground ourselves at one point?
Any help would be appreciated!!
Specs:
https://uk.pcpartpicker.com/list/PB8qdD
Then I had a sudden realisation I may have left an extra standoff in the case. So I removed the GPU, took out all the cables and lifted it just enough to see the standoffs and could only count the amount needed. Although I don’t reminder taking the extra one off!
After I put all the cables back in, it now won’t turn on. There’s no life what so ever to the PC and I can’t figure out how. I’ve checked the 8 pin and 24 pin connector, checked the front panel connectors are right. I’m now worried I might have fried my mother board (did this with my partner, maybe one of us forgot to ground ourselves at one point?
Any help would be appreciated!!
Specs:
https://uk.pcpartpicker.com/list/PB8qdD